The IEEE 802.3z standard includes 1000BASE-SX/100BASE-SX for transmission over multi-mode fiber, it uses a 1310nm FP or 850nm VCSEL transmit to 300m/550m/2KM. OCRECOM’s SFP MM transceiver including 155M, 1.25G, 2.5G, 4.25G.
查看详情
The IEEE 802.3z standard includes 1000BASE-ZX/100BASE-ZX for transmission over Single-mode fiber, it uses a 1550nm DFB transmit distance up to 200KM. OCRECOM’s SFP SM 1550 transceiver including 155M, 1.25G.
查看详情
The IEEE 802.3z standard includes 1000BASE-SX/100BASE-SX for transmission over multi-mode fiber, it uses a 1310nm FP/DFB transmit distance up to 40KM. OCRECOM’s SFP SM 1310 transceiver including 155M, 1.25G, 2.5G.
查看详情
OO281 Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp-Orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cables. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.
查看详情
OCRE’s 1x9 Transceiver Dual fiber is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of 850nm/1310nm/1550nm. The transmitter section incorporates an advanced VCSEL/FP/DFB and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode or APD and trans-impedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability. The data rate is from 250Kb/s to 2.5Gb/s.
查看详情
